Type
2S DHC
Designer
Bertone
Number of doors
2
Wheelbase
2445 mm 96.3 in
Track: Front
1372 mm 54 in
Track: Rear
1372 mm 54 in
Length
4260 mm 167.7 in
Width
1676 mm 66 in
Height
1327 mm 52.2 in
Length:wheelbase ratio
1.74
Ground clearance
165 mm 6.5 in
Kerb weight
930 kg 2050 lb
Fuel capacity
70.5 litres 15.5 UK Gal 18.6 US Gal
Bore
66.00 mm
Cylinders
S-6
Displacement
2 litre1971 cc(120.278 cu in)
Sump
Wet sumped
Compression ratio
9.00:1
Fuel system
3 So carbs
Maximum power(Net)
133.8 PS (132.0 bhp) (98.4 kW)@ 5500 rpm
Specific output
67 bhp/litre1.1 bhp/cu in
Maximum torque(Net)
174.0 Nm (128 ft?�·lb) (17.7 kgm)@ 5000 rpm
bmep
1109.4 kPa (160.9 psi)
Specific torque
88.28 Nm/litre
Manufacturer
Bristol
Coolant
Water
Bore/stroke ratio
0.69
Unitary capacity
328.5 cc/cylinder
Aspiration
Normal
Compressor type
N/A
Intercooler
None
Catalytic converter
N
Power-to-weight
141.94 bhp/ton
Engine location
Front
Engine alignment
Longitudinal
Drive
RWD
Suspension
front I.TL.
Tyres: Front
5.50-16
Tyres: Rear
5.50-16
Brakes F/R
Dr/Dr-S
Transmission
4M
Top gear ratio
1.00
Final drive ratio
3.90
RAC rating
16.2
year
1955
The Arnolt Arnolt-Bristol was produced from 1953 to 1960. 1 engine (2 liters / 130 hp) is on Histomobile. 142 units were produced.